There are many processing companies around us. Their scope of handling is some spare parts or some hardware. Many people have already seen these benefits and have joined this industry. Precision machining is one of them. So what is the quality of electroplating processing for precision parts.

Firstly, check the quality of pipeline hardware products

Taking the faucet as an example, the appearance of the product is not allowed to have burrs or dents. The material of the faucet is mainly copper zinc alloy. Some manufacturers do not use pure copper zinc alloys and often mix them with a large amount of impurities, so they do not use this product. Basically, the quality of the product cannot be guaranteed. When the electroplating process stops, sand holes, pinholes, and other phenomena often occur, which not only affect production quality but may also be considered immature during the electroplating process.

Therefore, before electroplating, it is necessary to master the inspection. If there is a problem during the electroplating process, please try to stop degreasing and then check. After stopping electroplating with qualified materials, stop comparing and checking if the material quality is the cause.

2、 Water heating hardware products stop polishing process

The appearance of pipeline components has been stopped and polished, the required shape, the rough appearance of the product is smooth, and the bubbles outside the components can be eliminated, so the appearance of the components is beautiful and corrosion-resistant.

In pipeline components, appearance quality is the ****** factor that determines the entire product. No burrs, pitting, pinholes, etc. are allowed, and the appearance brightness is high. Polishing process needs to be completed.